8 / 11

High precision protective film laminating machine PRO-J14_TF OMMA

High precision protective film laminating machine / OMMA / PRO-J14_TFHigh precision protective film laminating machine / OMMA / PRO-J14_TF
High precision protective film laminating machine / OMMA / PRO-J14_TFHigh precision protective film laminating machine / OMMA / PRO-J14_TF
ФабрикатOMMA
типPRO-J14_TF
СостояниеНОВЫЕ
Инвентарный номер1110221
Laminating rollers Ø 150 mm
Working width 1.300 mm
Max. workpiece thickness 80 mm
Speed adjustable 5/25 m/min
Working height (adjustable +/- 20mm) 905 mm
Вопросы по этому станку?
High precision protective film laminating machine
Brand: Omma
Type: PRO-J14_TF
New machine


Single machine (not integrated in a line)

Workpiece dimensions:
min. width 130 mm
max. width 560 mm
min. length 300 mm
max. length 2.250 mm
min. thickness 19 mm
max. thickness 25 mm

For application of self-adhesive film on the top of painted surfaces.

Laminating rollers Ø 150 mm
Working width 1.300 mm
Max. workpiece thickness 80 mm
Speed adjustable 5/25 m/min
Working height (adjustable +/- 20mm) 905 mm

Connected load kW 0.75
Integrated insertion/exit rollers Length (approx.) 300 mm
Color RAL 7021 + RAL 2004
Operator side (in front of the machine, towards the entrance) right side
Standard voltage v 400/50/3+N+T
Max. Outer diameter of roller Ø 300 mm
Inner diameter of roller Ø 76 mm

Technical equipment:
- High precision automatic cross cutting
  foil cutting device (static cut).
  Cutting position electrically programmable by using the encoder
  programmable. Cutting time ~ 1 sec.
  2 cutting modes possible:
  - Cut to the edges;
  - some mm outside the edges of the workpiece
    (depending on the adhesion of the film);
  - Inside the workpiece edges, up to approx. 20mm.
- Multifunctional display for machine programming
  and diagnostics.
  Machine is controlled by a PLC Siemens S7/1200
  with digital display and PROFINET interface,
  to manage different programs.
- Independent servo gearmotor controlled with servo
  Inverter for continuously variable speed.
- Upper laminating roller with special rubber dual layer.
- Electronic device for electrostatic charge with
  generator.
- Motorized thickness adjustment with digital display.
- Motorized infeed and outfeed rollers (300mm).
- Guide on infeed rollers for straight feeding.
- 1 foil top feed shaft with adjustable brake
  for the tension of the film.
- Independent electrical cabinet with 5m cable
  (ON/OFF power only) and operator display on the right side of the machine.
  side of the machine.
- Safety device.
- CE certification; manual in English.
- Electrical line and free signals 0-10v for tuning
  the speeds of infeed/outfeed.
- Special systems for pretensioning and controlled
  unwinding of the layer, independently motorized and electronically
  managed, specifically specified, use of very elastic
  layers and/or with very thin thicknesses
  and/or with highly adhesive layer to avoid wrinkles

- Operating instructions and language in the display in German

Ваше контактное лицо

Евгений Прис
менеджер по продажам в Восточную Европу