4 / 10

 / BABAERAN / KL-800-SI hot melt  / BABAERAN / KL-800-SI hot melt  / BABAERAN / KL-800-SI hot melt  / BABAERAN / KL-800-SI hot melt
C9Uh1MV1vMw
 / BABAERAN / KL-800-SI hot melt  / BABAERAN / KL-800-SI hot melt  / BABAERAN / KL-800-SI hot melt  / BABAERAN / KL-800-SI hot melt
ФабрикатBARBAERAN
типKL-800-SI hot melt
Состояниебывший в употреблении
Инвентарный номер0401686
Год выпуска2019
Вопросы по этому станку?
used Double sided flat lamination line
Brand: BARBERAN
Type: KL 800-SI HOTMELT
Year: 2019

Working width 720 mm

Existing of:
Infeeding roller conveyor
Length 2.920 mm
Width    800 mm
Rollerdiameter 65 mm
Rollerdistance 145 mm
Metal sheet protection between the rollers
Wit motor 0,37 KW
With symmetric adjustable lateral guides length 1.800 mm


Double sided HOT-MELT Lamination machine KL-800-SI
Suitable for paper and PVC foil with glue application onto the back side of the foil
With pressing calander
With top and bottom foil unwinding device
With top and bottom nozzle glue application device
The uncoiling shafts have an adjustable spool braking system for the foil tensioning and a manual-adjusting device to regulate lateral foil displacements during the application.
The Teflon coated slot keeps a uniform glue film application on the foil.
The regulation of the slot width is manually done by means of two independent gears, both placed on the operator´s side with numeric counter read outs ( 140 - 720 mm )
Length of the lamination machine: 2.100 mm
Working height 1.300 mm
Workpiece width 573 +/- 10 mm
Workpiece thickness 12,5 +/- 0,3 mm
Max. width of foil 620 mm
Throughfeed speed 5 - 25 m/min.
Needed airpressure 6-8 bar
Electrical connection  400 V / 50 Hz / 3 Ph + N + E

With 2 lateral cutting units for cutting the overhang foil just after the wrapping process
Each side 1 foil waste removal device ( done by a Venturi system )

1 glue melting device with 2 pumps for granulated HOTMELT ( EVA - POLYOLEFINE ) Modell VB-100
With an melting output of 60-80 kg/h
With 4 heated hoses diameter 16 mm and a length of 3 m for slot nozzle head applications.
Digital display for thermal channels and pump working control
Sliding electric cabinet for an easy service
Over and down temperature alarms
Stand by temperature in all channels to avoid adhesive degradation by job intervals
PID temperature control with +/- 0,5 °precsision
Tank with non adherent coating

Note:
The text is a copy of the former offer to this line. The datas are for general information and are not binded

Ваше контактное лицо

Евгений Прис
менеджер по продажам в Восточную Европу